1) Connect the fingerprint device to the USB port.
2) Install the device drivers for the device.
3) Step 2 will also copy NBioBSP.dll file in C:\Windows\System32.If this is not
available in the directory please download and copy the dll from
here .
4) Run command prompt with admin privilege and register the dll using below command:
5) Now run the application and when an information bar for allowing activex control
pops up, allow the same.This will show the standard interface for fingerprint capturing.
1) Connect the fingerprint device to the USB port.
2) Install the device drivers for the device.
3) Download the respective client service installer from the link below:
HFDU08 64 Bit
HFDU08 32 Bit
4) Unzip and install the client service on the computer.
5) Now run the application and when an information bar for allowing activex control
pops up, allow the same.This will show the standard interface for fingerprint capturing.
6) Use the Aaadhaar based finger print option wherever available in the application.
1) Connect the fingerprint device to the USB port.
2) Install the device drivers for the device.
3) Download the client service installer from the
link.
4) Unzip and install the client service on the computer.
5) Now run the application and when an information bar for allowing
activex control pops up, allow the same.This will show the standard interface for
fingerprint capturing.
6) Use the Aaadhaar based finger print option wherever available in the application.
1) Download the setup files from
link
2) Unzip the file and install the driver from folder 1 ( USB Drivers).
3) Connect the device and let the drivers install..
4) Install the multiservice from folder 2 from the zip file.
5) Use the option flatbed fingerprint (green bit) from capture fingerprint page.